H1P 115/130 Auxiliary mounting - Option H6 (SAE C, 14 teeth)Option H6, ISO 3019-1, flange 127-4 (SAE C, 14 teeth)P003 390E181.0 ± 0.35[7.126 ± 0.014]15.0 ± 0.25[0.591 ± 0.010]333.23 ± 2.0[13.119 ± 0.079]317.73 ± 2.0[12.509 ± 0.079]2x 90.5 ± 0.175[3.563 ± 0.007]∅134.06 + 0.13– 0[5.278 + 0.05– 0 ]∅127.05 + 0.076– 0[5.002 + 0.003– 0 ]23.3 + 1.0– 0[0.917 + 0.039– 0 ]1.956[0.077]4x 114.5 ± 0.35[4.508 ± 0.014]8x 57.25 ± 0.175[2.254 ± 0.007]Mounting flange surfaceFlange 127 - 4 per ISO 3019-1to be paint freeSpline dataNumber of teeth : 14Pitch fraction : 12/24Pressure angle : 30°Pitch-∅ : 29.633 [1.167]Typ of fit : Fillet root sideper : Ansi B92.1-1996 class 6R 0.8 max.[0.031]O-ring seal requiredref 120.32 [4.737] I.D.x 2.62 [0.103] cross sectionThread : M12x1.75-6H THDDepth : 25.0 [0.984] min.4xThread : M16x2.0-6H THDDepth : 28.5 [1.122] min.2xSpecificationsOption S1Spline 14 teeth, 12/24 pitchMaximum torque 816 N•m [7220 lbf•in]For definitions of maximum and rated torque values, refer to H1 Axial Piston Pumps Basic Information,BC00000057, the section “Shaft Torque Ratings and Spline Lubrication”.C CautionStandard pad cover is installed only to retain coupling during shipping. Do not operate pump without anauxiliary pump or running cover installed.Technical InformationH1P 115/130 Axial Piston Single PumpsDimensions© Danfoss | May 2018 BC00000198en-US0901 | 51
