Danfoss VLT AQUA Drive FC 202 Operating Instructions Manual

Also see for VLT AQUA Drive FC 202: Service guide Installation guide Installation guide Operating guide Installation guide

3 Mechanical Installation3.1 Unpacking3.1.1 Items SuppliedItems supplied may vary according to product configu-ration.• Make sure the items supplied and theinformation on the nameplate correspond to theorder confirmation.• Check the packaging and the frequency convertervisually for damage caused by inappropriatehandling during shipment. File any claim fordamage with the carrier. Retain damaged partsfor clarification.130BD666.10CHASSIS/ IP20 Tamb.45 C/113 FVLTMADE INDENMARKRP/N: 131F6653 S/N: 038010G50245kW(400V) / 60HP(460V)IN: 3x380-480V 50/60Hz 82/73AOUT: 3x0-Vin 0-590Hz 90/80AoCAUTION:See manual for special condition/mains fusevoir manual de conditions speclales/fusiblesWARNING:Stored charge, wait 15 min.Charge residuelle, attendez 15 min.* 1 3 1 F 6 6 5 3 0 3 8 0 1 0 G 5 0 2 *`AQUA Drivewww.danfoss.comT/C: FC-202P45KT4E20H1XGXXXXSXXXXAXBXCXXXXDXListed 76X1 E134261 Ind. Contr. Eq.o`124567 891031 Type code2 Order number3 Serial number4 Power rating5 Input voltage, frequency and current (at low/highvoltages)6 Output voltage, frequency and current (at low/highvoltages)7 Enclosure type and IP rating8 Maximum ambient temperature9 Certifications10 Discharge time (Warning)Illustration 3.1 Product Nameplate (Example)NOTICEDo not remove the nameplate from the frequencyconverter (loss of warranty).3.1.2 StorageEnsure that requirements for storage are fulfilled. Refer to8.4 Ambient Conditions for further details.3.2 Installation EnvironmentsNOTICEIn environments with airborne liquids, particles, orcorrosive gases, ensure that the IP/Type rating of theequipment matches the installation environment. Failureto meet requirements for ambient conditions can reducelifetime of the frequency converter. Ensure thatrequirements for air humidity, temperature and altitudeare met.Vibration and ShockThe frequency converter complies with requirements forunits mounted on the walls and floors of productionpremises, as well as in panels bolted to walls or floors.For detailed ambient conditions specifications, refer to8.4 Ambient Conditions.3.3 MountingNOTICEImproper mounting can result in overheating andreduced performance.Cooling• Ensure that top and bottom clearance for aircooling is provided. See Illustration 3.2 forclearance requirements.Mechanical Installation VLT® AQUA Drive FC 202 Operating InstructionsMG20MA02 - Rev. 2013-10-29 93 3