Danfoss VLT AutomationDrive FC 360 Programming Manual

Also see for VLT AutomationDrive FC 360: Quick guide Quick guide Quick guide Programming guide Design guide

Contents

Danfoss VLT AutomationDrive FC 360 Programming Manual Manual pdf 31 page image

3.4 Parameters: 3-** Reference/Ramps3.4.1 3-0* Reference LimitsParameters for setting the reference unit, limits and ranges.3-00 Reference RangeOption: Function:[0] Min - Max Select the range of the reference signal andthe feedback signal. Signal values can bepositive only, or positive and negative.[1] -Max - +Max For both positive and negative values (bothdirections), relative to 4-10 Motor SpeedDirection.3-01 Reference/Feedback UnitOption: Function:[0] None[1] %[2] RPM[3] Hz[4] Nm[5] PPM[10] 1/min[12] Pulse/s[20] l/s[21] l/min[22] l/h[23] m³/s[24] m³/min[25] m³/h[30] kg/s[31] kg/min[32] kg/h[33] t/min[34] t/h[40] m/s[41] m/min[45] m[60] °C[70] mbar[71] bar[72] Pa[73] kPa[74] m WG[80] kW[120] GPM[121] gal/s[122] gal/min[123] gal/h[124] CFM[125] ft³/s[126] ft³/min[127] ft³/h[130] lb/s3-01 Reference/Feedback UnitOption: Function:[131] lb/min[132] lb/h[140] ft/s[141] ft/min[145] ft[150] lb ft[160] °F[170] psi[171] lb/in2[172] in WG[173] ft WG[180] HP3-02 Minimum ReferenceRange: Function:0 Reference-FeedbackUnit*[ 0 - 4999ReferenceFeed-backUnit]Enter the MinimumReference. The MinimumReference is the lowestvalue obtainable bysumming all references.Minimum Reference is activeonly when 3-00 ReferenceRange is set to [0] Min.- Max.The Minimum Referenceunit matches:• The choice ofconfiguration in1-00 ConfigurationMode ConfigurationMode: for [1] Speedclosed loop• The unit selectedin 3-01 Reference/Feedback Unit3-03 Maximum ReferenceRange: Function:Sizerelated*[-4999.0 - 4999ReferenceFeed-backUnit]Enter the Maximum Reference. TheMaximum Reference is the highestvalue obtainable by summing allreferences.The Maximum Reference unitmatches:• The choice of configu-ration in1-00 Configuration Mode:for [1] Speed closed loop• The unit selected in3-00 Reference RangeParameter Descriptions VLT® AutomationDrive FC 360 Programming GuideMG06C102 - VLT® is a registered Danfoss trademark 293 3