Danfoss VLT ISD 410 Operating Instructions Manual

Contents

Danfoss VLT ISD 410 Operating Instructions Manual Manual pdf 39 page image

12 Specifications12.1 NameplateCheck the nameplate and compare it with the order data.Use the part number for reference.The part number uniquely identifies the drive type.130BC491.10ISD410Made in GermanyUin : 300VDCoSERVO - DRIVE:linS3 : 4ADC 6% ED 120s linS1: 0,2ADCMnS3: 8Nm 6% ED 120s MnS1: 2,1NmAMBIENT : 5...40 C/41...104 FENCLOSURE: IP65Nn: 600rpmoBrake: no brakePART NO: 175G7825 SERIAL NO : 000101M112*175G782500010M112*1234567 98Illustration 12.1 NameplateThe following data is shown on the nameplate of the ISDmotor:1 Supply voltage 6 Rated speed2 Current details 7 Part number3 Power rating 8 Brake option4 Ambient temperature range 9 Serial number5 Protection rating 10Table 12.1 Legend to Illustration 12.1Check that the nameplate is clearly legible.The servomotors can be identified externally only by theoriginal Danfoss nameplate.12.2 StorageStore the servomotors in a dry, dust-free location with lowvibration (veff ≤0.2 mm/s).The storage location must be free from corrosive gases.Avoid sudden temperature changes.12.2.1 Long-term StorageNOTETo recondition the electrolytic capacitors, servomotors notin service must be connected to a supply voltage sourceonce per year to allow the capacitors to charge anddischarge, as otherwise the capacitors will sufferpermanent damage.Specifications VLT® ISD 410 Servomotor Operating Instructions38 MG75D102 - VLT® is a registered Danfoss trademark1212