7.4 Installation of Option Boards 837.5 Galvanic Isolation Barriers 838 Using the Control Panel 858.1 Navigating on the Control Panel 858.2 Using the Monitoring Menu (M1) 858.2.1 Monitored Values 868.3 Using the Parameter Menu (M2) 878.3.1 Finding the Parameter 878.3.2 Selecting Values 888.3.3 Editing the Values Digit by Digit 898.4 Using the Keypad Control Menu 908.4.1 Finding the Keypad Control Menu 908.4.2 Keypad Control Parameters M3 918.4.3 Changing the Control Mode 918.4.4 Keypad Reference 928.4.5 Changing the Rotation Direction 928.4.6 Disabling the Stop Motor Function 938.4.7 Special Functions in Keypad Control Menu 938.5 Using the Active Faults Menu (M4) 948.5.1 Finding the Active Faults Menu 948.5.2 Examining the Fault Time Data Record 958.5.3 Fault Time Data Record 958.6 Using the Fault History Menu (M5) 968.6.1 Fault History Menu (M5) 968.6.2 Resetting the Fault History 978.7 Using the System Menu (M6) 978.7.1 Finding the System Menu 978.7.2 System Menu Functions 978.7.3 Changing the Language 1008.7.4 Changing the Application 1008.7.5 Copy Parameters (S6.3) 1018.7.6 Security 1048.7.7 Keypad Settings 1078.7.8 Hardware Settings 1088.7.9 System Info 1118.8 Using the Expander Board Menu 1148.8.1 Expander Board Menu 1148.8.2 Examining the Connected Option Boards 1148.8.3 Finding the Option Board Parameters 1158.9 Further Control Panel Functions 115ContentsOperating guide | VACON® NXS/NXP Air-cooledDPD00910G | 5Danfoss A/S © 2018.06
