Danfoss vlt soft starter mcd 500 Operating Manual

Also see for vlt soft starter mcd 500: Installation instructions Installation instructions Installation instructions Installation guide Installation guide

Contents

Danfoss vlt soft starter mcd 500 Operating Manual Manual pdf 54 page image

6.2 Operation and LCP6.2.1 Operating ModesIn hand-on mode:• To soft start the motor, press [Hand On] on theLCP.• To stop the motor, press [Off] on the LCP.• To reset a trip on the soft starter, press [Reset] onthe LCP.• To stop the motor with a coast to stop, regardlessof the setting of parameter 1-10 Stop mode, press[Off] and [Reset] at the same time. The softstarter removes power from the motor and opensthe main contactor, and then the motor coasts tostop.In auto-on mode:• To soft start the motor, activate the Start remoteinput.• To stop the motor, activate the Stop remote input.• To reset a trip on the soft starter, activate theReset remote input.NOTICEBrake and jog functions operate only with in-lineconnected motors (see chapter 4.3.3 Inside Delta Instal-lation).6.2.2 The LCP177HA383.1034521®1 4-line display for status and programming details.2 Display control keys:[Status]: Returns to the status displays.[Quick Menu]: Opens the Quick Menu.[Main Menu]: Opens the Main Menu.[Alarm Log]: Opens the Alarm Log.3 Menu navigation keys:[Back]: Exits the menu or parameter, or cancels aparameter change.[OK]: Enters a menu or parameter, or saves aparameter change.[▲]/[▼]:Scroll to the next or previous menu orparameter.Change the setting of the currentparameter.Scroll through the status screens.4 Soft starter local control keys:[Hand On]: Starts the motor and enters localcontrol mode.[Off]: Stops the motor (only active in hand-onmode).[Auto On]: Sets the soft starter to auto-on mode.[Reset]: Resets a trip (hand-on mode only).5 Remote input status indicators.Illustration 6.1 LCP LayoutOperation VLT® Soft Starter MCD 50052 Danfoss A/S © 05/2016 All rights reserved. MG17K60266