Danfoss vlt soft starter mcd 500 Operating Manual

Also see for vlt soft starter mcd 500: Installation instructions Installation instructions Installation instructions Installation guide Installation guide

Contents

Danfoss vlt soft starter mcd 500 Operating Manual Manual pdf 56 page image

• Motor power.• Last start information.• Date and time.• SCR conduction bar graph.• Performance graphs.NOTICEScreens shown here are with the default settings.6.6.1 Temperature Monitoring Screen (S1)The temperature screen shows the temperature of themotor as a percentage of total thermal capacity. It alsoshows which motor data set is in use.The temperature monitoring screen is the default statusscreen.Ready S1MS1 000.0A 000.0kWPrimary Motor SetM1 000%6.6.2 Programmable Screen (S2)The user-programmable screen of the soft starter can beconfigured to show the most important information for theparticular application. Use parameters 8-2 to 8-5 to selectwhich information to show.Ready S2MS1 000.0A 000.0kW-.-- pf00000 hrs6.6.3 Average Current (S3)The average current screen shows the average current ofall 3 phases.Ready S3MS1 000.0A 000.0kW0.0A6.6.4 Current Monitoring Screen (S4)The current screen shows real-time line current on eachphase.Ready S4MS1 000.0A 000.0kWPhase currents000.0A 000.0A 000.0A6.6.5 Frequency Monitoring Screen (S5)The frequency screen shows the mains frequency asmeasured by the soft starter.Ready S5MS1 000.0A 000.0kW00.0Hz6.6.6 Motor Power Screen (S6)The motor power screen shows motor power (kW, hp, andkVA) and power factor.Ready S6MS1 000.0A 000.0kW000.0kW 0000HP0000kVA -. - - pf6.6.7 Last Start Information (S7)The last start information screen shows details of the mostrecent successful start:• Start duration, (s).• Maximum start current drawn (as a percentage ofmotor full load current)• Calculated rise in motor temperature.Ready S7MS1 000.0A 000.0kWLast start 000 s000% FLC ΔTemp 0%6.6.8 Date and Time (S8)The date and time screen shows the current system dateand time (24-hour format). For details on setting the dateand time, see chapter 9.1 Set Date and Time.Ready S8MS1 000.0A 000.0kWYYYY MMM DDHH:MM:SSOperation VLT® Soft Starter MCD 50054 Danfoss A/S © 05/2016 All rights reserved. MG17K60266