4. Commands4-6 UniSite-xpi User ManualSelecting a DeviceTo select a device, do the following:1. From the Main Menu, select Select Device. (If you are not in the MainMenu, press F1 to return to the Main Menu.)2. You might be prompted to insert a disk. If so, insert the disk you areprompted for.3. Depending on which Algorithm Type is selected, one of the followingscreens appears:• The Device Manufacturer List screen appears if the algorithm typeis set to D (default). Selecting a device from this screen is a two-stepprocess: first, select the device manufacturer and then the devicepart number. Continue with steps 4 and 5 of this procedure.• The Extended Algorithm screen appears if the algorithm type is setto E (extended). Selecting a device from this screen is a two-stepprocess: first, select the device manufacturer and then the devicepart number. Continue with steps 4 and 5 of this procedure.• The Keep Current screen appears if the algorithm type is set to K(Keep Current). Skip to step 5 of this procedure.• The Custom Menu screen appears if the algorithm type is set to C(Custom Menu). Skip to step 5 of this procedure.Note: If a different screen than the one you want appears, refer to “Before YouSelect a Device” on page 4-5 for instructions on how to select anAlgorithm Type.4. If your Algorithm Type is set to D (default) or E (ExtendedAlgorithm), a list of device manufacturers supported by theprogrammer appears. The list also contains the followingnon-manufacturer choice:Note: Depending on what version of software you have, additionalnon-manufacturer choices may be available.Select a manufacturer (or one of the non-manufacturer choices), bylocating the manufacturer choice and entering the number thatappears next to that choice in the manufacturer field. For example, if2)KEEP CURRENT is a choice, type the number 2 for themanufacturer and press E NTER.KEEP CURRENT Selecting KEEP CURRENT allows you to selecta device whose algorithm was downloadedusing Keep Current. This choice is the same asselecting K (Keep Current) as the AlgorithmType.MainMenuSelectDevice DeviceList
