3. Getting StartedUniSite-xpi User Manual 3-19From the Data menu, select Translation Format. Highlight the format ofthe file you will load into RAM, then click OK. For more informationabout translation formats, see Chapter 6, “Translation Formats.”When the file is successfully loaded into programmer RAM, a messagebox displays the RAM sumcheck.Note: Because TaskLink for DOS is running in Simulation Mode, the checksumdisplayed is 00000000. When connected to a programmer and loading realdata, the checksum will display actual values.Session 9: Selecting ProcessesAfter loading data into programmer RAM, the next step is determiningwhich processes the programmer will perform on the device.Figure 3-31Translation FormatFigure 3-32Sumcheck
