DataCard SD260 Installation And Administrator's Manual

Also see for SD160: User guide User guide Quick install guide

Contents

DataCard SD260 Installation And Administrator's Manual Manual pdf 57 page image

SD160/SD260 Card Printers Installation and Administrator’s Guide 43FrontPanelUse the FrontPanel settings to customize the printer front panel.Change the front panel settings as needed, and then click Set Current to apply the changes. BacklightBrightness—Set the LCD front panel backlight brightness at the desired level, from0 percent (no backlight) to 100 percent (bright). KeySenseLevel—Set the front panel key sensitivity to a comfortable level. Select from 0 (lowsensitivity, almost a press) to 10 (high sensitivity, barely a touch). LcdConfigMenu—Enable or disable access to the Configuration menu on the LCD panel menusystem. (The Status and Maintenance menus cannot be disabled.) LedCardsPickedToCleaning—Set the number of cards to pick between required cleaning. Thecard light displays amber when the printer reaches this value. If this value is set to 0, cardsbetween cleaning are not tracked. LedPrintheadCyclesToCleaning—Set the number of printhead cycles between requiredcleaning. The card light displays amber when the printer reaches this value. If this value is setto 0, cycles between cleaning are not tracked. LedRibbonLow—Set the percentage of ribbon remaining before being notified that theribbon is low and should be changed. The ribbon light displays green when the ribbonreaches this value. SpeakerEnabled—Enable or disable the external printer speaker. The speaker provides asound in addition to the front panel lights and LCD text.DescriptionDefaultValue Current Value (unit) Allowed Range1) BacklightBrightness 100 100 percent [0 – 100]2) KeySenseLevel 4 6 None [0 – 10]3) LcdConfigMenu Enabled Enabled4) LedCardsPickedToCleaning 1500 1500 quantity [0 – 1000000]5) LedPrintheadCyclesToCleaning 2500 2500 quantity [0 – 1000000]6) LedRibbonLow 10 10 percent [0 – 100]7) SpeakerEnabled Enabled Enabled