DataCard SD260 Installation And Administrator's Manual

Also see for SD160: User guide User guide Quick install guide

Contents

DataCard SD260 Installation And Administrator's Manual Manual pdf 82 page image

68 Supplies and Parts Continuous black (K ribbon), up to 500 images per roll Continuous black (K ribbon), up to 1500 images per roll Continuous dark blue, up to 1500 images per roll Continuous white, up to 1500 images per roll Continuous red, up to 1500 images per roll Continuous green, up to 1500 images per roll Continuous silver, up to 1500 images per roll Continuous gold, up to 1500 images per roll Continuous silver metallic, up to 1500 images per roll Continuous gold metallic, up to 1500 images per roll Continuous scratch‐off, up to 1500 images per rollRibbon SaverA roll of Datacard‐certified monochrome ribbon enables the Ribbon Saver feature in the printer.Ribbon Saver can increase the number of cards printed with each roll of ribbon because only theprinted portion of the ribbon is used. Excess ribbon is not advanced, reducing waste.Print Ribbon Storage Guidelines Store print ribbon in the original package until you load it in the printer. Keep the originalpackaging closed until you are ready to use the ribbon. The print ribbon maintains its quality for about one year. For optimum card quality, purchaseand store quantities of print ribbon that can be used within one year. The print ribbon and card stock might require secure storage and tracking. Follow yourorganization’s policy for storing and tracking the supplies used to make cards. Store the print ribbon in a location away from direct sunlight, with a temperature between32° and 77°F (0° and 25°C). A range of 40% to 60% non‐condensing humidity isrecommended. Install supply rolls at room temperature. If supplies are stored in an environment that iscooler than the printer environment, allow supplies to reach room temperature before youuse them. If the printer will not be used for an extended period, remove supplies from the printer andstore them with new supplies.