18 SR200 & SR300 Printer and LM200 & LM300 Laminator User GuidePrint cards using ID software1 Follow the instructions for the ID software to capture, format, andsave the data for the card.2 In the software, sendcards to the printer(usually, use the Printbutton).3 The printer driverreceives data for eachcard, prepares thecard for printing, andsends each card to theprinter.Print from a PC application1 Use the page setup feature in the application to set the following:— Set paper or page size to CR80 card or 2.125" x 3.375"— Set the orientation for the card design – either portrait orlandscape.— Set margins to zero for edge to edge printing.2 Format and save the card information.3 Select the SR-CP U1 printer from the Print dialog box. SR-CP U1 isthe default name of the printer. Your printer may have a differentname.4 Click the Properties button to open the Printing Preferences dialogbox. Use the Setup, Print, and Encode tabs to set printer properties.Setup tabUse the Setup tab to set thecard orientation, number ofcopies, and whether to reversethe card.Print tabUse the Print tab to set printingon one side or both sides, androtation. The Print tab containssettings for using the color(YMC) and black (K) panels ofthe print ribbon. The tab alsocontains controls for coloradjustment, setting up a look-up table, and specifying theprint area for ribbon panels,including peel-off areas.
