62 SR200 & SR300 Printer and LM200 & LM300 Laminator User GuideCleaning the printerThis section provides information on proper care and cleaning of the SR200 &SR300 printer. It also includes recommendations on how often to clean andreplace components.Cleaning the cleaning unitThe cleaning unit is located inside the printer door and cleans lint and otherdebris from the cards before printing. To clean the unit:1 Open the printer door.2 Pull the cleaning unit out.3 Wash the blue cleaning rollers withwater. Rub rollers gently underrunning water. Do not useisopropanol or detergents to cleanthe rollers.4 Allow the card cleaning rollers todry thoroughly.5 Reinstall the cleaning unit with theblue rollers facing to the right.6 Close the printer door.Card load rollerThe card load roller is located under the card hopper, and picks cards beforethey are printed.1 Remove the card hopper. See “Remove Hopper and Cards” onpage 9.2 Using a cleaning wipe withisopropanol, wipe the rollerwhile pushing it toward theprinter.3 Replace the card hopper.See “Replace the Hopper”on page 9,Tips – Card cleaning roller• Wash the card cleaningrollers regularly, such asevery time you changethe ink ribbon.• More frequent cleaningmay be required underheavy use conditions.Clean rollers every 200cards to improve printquality.• Allow the card cleaningrollers to dry thoroughlybefore reinstalling them inthe printer.• Replace the cleaning unitannually.
