SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide 416 Click the Update button to activate the security lock and prevent access to thesupplies in the printer.Tips for Success• Write down the password and store it in a safe place.• Do not forget the password. You can ask your service provider for assistance, butthis is not covered by the warranty.• The Status Monitor password and the security number entered on the printer panel arenot linked. You can use different values for these items.Status monitor messagesThe following messages are displayed in message boxes by the Status Monitor. See“Printer Status tab” on page 33.Error Code Displayed Message Solution0102D000 Cards have run out. Load cards as described in “Load cards” onpage 8 .0102D000 The card hopper is detached. Close or replace the card hopper securely.0102D100 Printer door is open. 1 Close the printer door.2 Press Reset and then Enter to initialize theprinter.0102D100 The cleaning unit is detached. 1 Install the Cleaning Unit and then close thedoor. See “Cleaning the cleaning unit” onpage 62 ,2 Press Reset and then Enter to initialize theprinter.0102D3000102D4000102D500The printer is busy. —0102DA00 Preheating is in progress. Wait until preheating is complete.0102DB00 Printer is initializing. Wait until initialization is complete.0102DC00 Offline testing is in progress. Wait until the offline test is complete.Cleaning is in progress. Wait until cleaning is complete.0102DD00 Operator panel is currently in use. —The printer is in the transport mode. Cancel the transport mode.0102DE00 The firmware cannot be downloaded. Set the printer to the download mode.
