SR200 & SR300 Card Printers and LM200 & LM300 Laminators User’s Guide 133. Insert cards (3).Refer to the illustrations for the correct card orientation: For SR200 (single‐side) printers, position the top of landscape‐oriented cards away from the printer with the front of the cardfacing down. For SR300 (duplex) printers: Load ISO‐1 magnetic stripe cards with the stripe up and towardthe printer. For most applications, load contact chip cards with the chipdown and toward the back of the printer. For custom applications, the card load orientation may bedifferent.4. Slide the hopper cover over the cards (4).5. Slide the card hopper latch closed (5).Removing the Card Hopper and CardsThe card hopper can be removed from the printer forsecure storage, to adjust card thickness, or for cleaning.1. Slide the card hopper latch closed (1).2. Lift the hopper up (2). The hopper cover and hopperare locked together and both are removed.
