Datalogic DS2100N Reference Manual

Also see for DS2100N: Quick reference guide Brochure & specs Reference manual

Contents

Datalogic DS2100N Reference Manual Manual pdf 18 page image

DS2100N REFERENCE MANUAL81STEP 4 – INSTALLING GENIUS™ CONFIGURATION PROGRAMGenius ™ is a Datalogic scanner configuration tool providing several important advantages: Wizard approach for new users; Multi-language version; Defined configuration directly stored in the reader; Communication protocol independent from the physical interface allowing to consider thereader as a remote object to be configured and monitored.To install Genius™, turn on the PC that will be used for the configuration, runningWindows 98, 2000/NT, XP, Vista or 7, then insert the Genius™ CD-ROM, wait for the CDto autorun and follow the installation procedure.This configuration procedure assumes scanner connection to a CBX100/500. Genius™,running on a laptop computer, is connected to the scanner auxiliary port through theCBX100/500 9-pin connector. To communicate with the scanner, Genius™ performs an autobaudrate detection starting from its default parameters which are 115200, 8, N, 1. Theseparameters can also be set in the Genius™ Tools>Options>Communications window.Wizard for Quick Reader SetupAfter installing the Genius™ software program the following window appears asking the userto choose the desired configuration level.Figure 8 - Genius™ Wizard Opening WindowThe Wizard option is advised for rapid configuration or new users, since it shows a step-by-step scanner configuration.