Datalogic DS6300 Reference Manual

Also see for DS6300: Quick reference guide Reference manual Quick reference guide Reference manual Reference manual

Contents

Datalogic DS6300 Reference Manual Manual pdf 53 page image

INSTALLATION 2ATTENTIONIf using the “45° Skew” installation, it is not guaranteed that the scannerreading performances (see reading diagrams in par. 4.3.1) will matchthose measured for the standard installation with Skew angle between10° - 20°.The ST-210 mounting bracket is an accessory of the DS6300NOTEstandardmodel available in the US-60 kit (order no. 890001020).2.7 TYPICAL LAYOUTSThe DS6300 scanners can be connected in a variety of layouts depending on the number ofeveral power supplies are available to power the reading stations. Photoelectric sensorsrs (see par. 3.2 for details).he accessories and cables indicated in the following figures are Datalogic products. Wethe correct system functioning.rface. The Main interface can be selected for RS232 or RS485 full-duplexommunications.Two different layouts are available according to the DS6300 reader model used for theconnection.scanners used and the required complexity of the reading station. These layouts range fromSingle Stand Alone to Complex Lonworks Networks.Sused as code presence sensors and optical encoders to signal conveyor speed are alsoavailable accessories.The following typical layouts refer to the system hardware configurations, but they alsorequire the correct setup of the software configuration parameteTsuggest their use to guarantee2.7.1 Point-to-PointUsing a Point-to-Point layout, the data is transmitted on the Main interface as well as on theAuxiliary intec37