Datalogic DS6300 Reference Manual

Also see for DS6300: Quick reference guide Reference manual Quick reference guide Reference manual Reference manual

Contents

Datalogic DS6300 Reference Manual Manual pdf 64 page image

DS630022.7.6 Fieldbus NetworkThe Fieldbus Ethernet model offers connectivity without any converter or adapter needed.The DS6300 master Fieldbus communicates with a remote host (for ex. remote PCconnected via Internet) by means of a cable connected to the Fieldbus connector provided. Itcan be activated by a signal generated by the remote Host or by a physical presence sensor.The external signals (trigger, encoder) are connected to the master through the C-BOX 100.The master reader connects to the first slave reader of the system through the localLonworks 9-pin female connector. Fieldbus models are provided with an internal Lonworksterminator.The slave readers are connected together through the local Lonworks connectors. Only the9-pin female connector of the last slave reader must be terminated by the BTK-6000terminator.The example below shows a system powered by the PWR-240 where multiple slaves areconnected through CAB-63XX power cable. The master and all slaves are connectedtogether through the CAB-610X cables.The same network layouts are available as for the DS6300 standard model.FieldbusNetworkCAB-60XXSlave 5*** Slave 4*** Slave 3***Slave 2*** Slave1**** P.S. (Presence Sensor) connected to External Trigger/PS input.** C-BOX 100 modified to accept scanner power.*** The Slave scanners are Master/Slave models, which allow Lonworks network propagation.**** Encoder connected to IN2/ENC input.Figure 61 – Fieldbus Small Synchronized NetworkRemote HostBTK-6000PWR-240CAB-63XXMasterC-BOX 100**PS*Encoder****CAB-610X CAB-610XCAB-63XXCAB-610X CAB-610XCAB-610X48