Datalogic DS6300 Reference Manual

Also see for DS6300: Quick reference guide Reference manual Quick reference guide Reference manual Reference manual

Contents

Datalogic DS6300 Reference Manual Manual pdf 74 page image

DS63003Network WizardBefore performing this procedure, a Lonworks address must be assigned to each slavescanner. The most practical method is through the Net-Autoset procedure. See par. 3.2.3 foralternative address assignment methods.Once all addresses have been assigned, the Network Wizard is to be used when one ormore scanner addresses and labels need to be modified.1. Click on the button to open the Network Wizard dialog box:a. if the slave scanners have already been configured and wired to the network, click onthe Autodetect button to start a polling procedure of the current network. All slavescanners found will be represented in the “Current Devices” area. Then, select thedesired slave scanner from the “Current Devices” area and click on the icon (ordrag and drop) to transfer it to the “Requested Devices” area where your networkcustomization is defined. The following dialog box will appear allowing (if necessary)to change the slave address ("Available Device" field) and label ("Description" field):if the slave scanners have not been configured and wired to the network, click on theb.icon to add a new device defining its address and model. The added slaverequires that all slave scanners have their address set before the network canfunction.scanner will be then displayed in the “Requested Devices” area. This option in anycase58