COMPLIANCEELECTRICAL SAFETYThis product conforms to the applicable requirements contained in the European Standard forelectrical safety EN-60950-1 at the date of manufacture.LASER SAFETYThe following information is provided to comply with the rules imposed by internationalauthorities and refers to the correct use of the DS6300 reader.Standard RegulationsThis scanner utilizes a low-power laser diode. Although staring directly at the laser beammomentarily causes no known biological damage, avoid staring at the beam as one wouldwith any very strong light source, such as the sun.Avoid that the laser beam hits the eye of an observer, even through reflective surfaces suchas mirrors, etc.This product conforms to the applicable requirements of both EN60825-1 andCDRH 21 CFR1040 at the date of manufacture. The reader is classified as a Class 2 laserproduct according to EN60825-1 regulations and as a Class II laser product according toCDRH regulations.Disconnect the power supply when opening the device during maintenance or installation toavoid exposure to hazardous laser light.There is a safety device which allows the laser to be switched on only if the motor is rotatingabove the threshold for its correct scanning speed.Use of controls or adjustments or performance of procedures other thaWARNINGn thosespecified herein may result in exposure to hazardous visible laser light.The laser light is visible to the human eye and is emitted from the window on the head of thereader (Figure A, 7).Warning labels indicating exposure to laser light and the device classification are appliedonto the head of the reader (Figure A, 1, 3):AVOID EXPOSURELASER RADIATION IS EMITTED FROM THIS APERTURE AVOID EXPOSURE – LIS EMITTED FROM THASER LIGHTIS APERTURELaser Safety Label for Oscillating Mirror and Standard ModelsCAUTION-CLASS 3BLASER LIGHTWHEN OPENAVOID EXPOSURETO BEAMLASER LIGHT – DO NOT STARE INTO BEAMCLASS 2 LASER PRODUCTMAX. OUTPUT RADIATION 1 mWEMITTED WAVE LENGTH 630 ~ 680 nmEN60825-1:2001Warning and Device Class Labelvi