CUSTOM CABLE ELECTRICAL CONNECTIONS4144 CUSTOM CABLE ELECTRICAL CONNECTIONSEach scanner model has the following connectors:Scanner Model ConnectorsMaster/Slave 25-pin male serial interface and I/O connector9-pin male Lonworks connector (see caution below)9-pin female Lonworks connectorEthernet 26-pin male serial interface and I/O connector9-pin female Lonworks connectorM12 4-pin D-coded connector for Ethernet *DeviceNet 26-pin male serial interface and I/O connector9-pin female Lonworks connector5-pin male connectorProfibus 26-pin male serial interface and I/O connector9-pin female Lonworks connector9-pin female Profibus connector* older models have RJ45 modular connector for EthernetCAUTIONDo not connect an RS232 port to the 9-pin Lonworks Connector. This maydamage your Laptop PC.DS6400 scanners are equipped with a 25-pin male D-sub connector (Master/Slave models)or a 26-pin male D-sub connector (Fieldbus models) for connection to the host computer,power supply and input/output signals. These signals can be wired using a custom cableaccording to the application needs.The paragraphs in this chapter detail the individual signal connections.For Lonworks network connections see chapters 5 and 7.For Fieldbus connections see chapters 6 and 7.For ID-NET™ Fixed Baudrate connections see the Application Note on the CD-ROM.
