DS6400 REFERENCE MANUAL5866 FIELDBUS CONNECTIONS6.1 ETHERNET INTERFACEThis connector is only available for DS6400 Ethernet models and allows the Ethernetconnection between the host and the reader.Figure 77 –DS6400 M12 4-pin D-Coded Female Ethernet ConnectorThis interface and the connector pinout (see the following table) are IEEE 802.3 10 BaseTand IEEE 802.3u 100 Base Tx compliant.M12 4-pin D-coded Female PinoutPin Name Function1 TX + Transmitted data (+)2 RX + Received data (+)3 TX - Transmitted data (-)4 RX - Received data (-)In order to meet EMC requirements use Ethernet shielded cable.The Ethernet interface can be used for TCP/IP communication with a remote or local hostcomputer by connecting the scanner to either a LAN or directly to a host PC. There is noneed to use a crossover adapter since scanner incorporates an auto-cross function.The following is an example of a connection to a LAN using a CAB-ETH-M0x straightthrough cable:DS64003421TX-RX+TX+RX-LAN42631578TX-RX+TX+RX-M12D-codedRJ45Figure 78 – Straight Through CableFor further details refer to the “Ethernet Service Guide” document provided as referencedocumentation.3412
