REFERENCES 55.2.5 Inter-Block DelayFor the PEN Emulation interface, data are sent to the Host in fixed size blocks of 20characters each. The inter-block delay parameter allows setting a delay betweeneach block sent to the Host.5.3 IBM 46XX PARAMETERS5.3.1 IBM Data Formatting (Transmission Format)The IBM 46xx series cash register recognizes the following codes:• EAN 8/ EAN 13 / UPC A / UPC E with and without Add On• Interleaved 2/5• Code 39• Codabar• Code 128• Code 93• Normal 2/5The transmission format of codes belonging to this set is specified by the protocol. Asthe reader allows a wider set of codes to be selected, the following formats aredefined to offer the user all the reading possibilities of the Datalogic products.Conversion to Code 39 FormatData from any code selected may be transmitted. Each code is transmitted to theHost as Code 39. Any character not included in the standard Code 39 set will bereplaced with a “Space” (20 Hex).IBM Standard FormatOnly codes belonging to the above mentioned set may be transmitted. Each codetransmitted to the Host is recognized by the identifier requested by the protocol. If theselected code does not belong to this set, it will not be transmitted.Mixed IBM Standard + Code 39 FormatData from any code selected may be transmitted. For codes belonging to the abovementioned set, the “IBM Standard Format” is applied. The “Code 39” format appliesto codes not belonging to this set.133
