CONFIGURATION 44.1.4 Sending Configuration Strings from Hostal pendix A using the RS232i fa many devices need to beith the same sett g the desired parameterttings can be prepared to con sily.4.2or Gryphon™ D-Series readers, follow the setup procedures in pars. 4.3 and 4.6.sicp icStand Alone applications allow communication with the Host by either the-Gryphon™ cradle (par. Modem™ radio modemSTAR-System™ applications allow communication with the Host through an RS485dioProceed as shown in the following diaAnnterternative configuration method is provided in Ape. This method is particularly useful whencconfigured wseings. Batch files containinfigure adevices quickly and eSETUP PROCEDURESFFor Gryphon™ D USB readers, follow the setup procedures in par. 4.7.or Gryphon™ M-Series readers, the setup procedures depend on two baFa pl ations, Stand Alone or STAR-System™.OM(par. 4.4.2).4.4), or by the STAR-netwmodork by the STARGATE™ RF base station or by the STAR-Modem™ ram (par. 4.5).egram:E n d o f S etu pY our reader is now ready to readbarcodes using the default settings.S tand Alon e Ap plicationsG R Y P H O N ™ M /O M -G R Y P H O N ™P ar. 4.4P ar. 4.6O p tio n al P ar. 4.4.1m ultiple guns per O M -G R Y P H O N ™G R Y P H O N ™ M /S T AR -M o d em ™in S tand A lone M odeP ar. 4.4.2G R Y P H O N ™ DP ar. 4.3P ar. 4.6S TAR -S ystem ™ Ap p licatio n sG R Y P H O N ™ M /S T AR -S ystem ™P ar. 4.5™ in STA R-System ™ M ode• S TA RG ATE ™• S TA R-M odemG R Y P H O N ™ D U SBP ar. 4.7B eg in S etu p by cho ing the setupprocedure for your R Y P H O N ™reader as indicated below.osG13
