References294 Gryphon™ I GD/GBT/GM4500Scan ModeSelects the scan operating mode for the reader. Selections are:Trigger Single: When the trigger is pulled, scanning is activated until one of thefollowing occurs: Stand Mode Indication has elapsed a label has been read the trigger is releasedThis mode is associated with typical handheld reader operation: when the trig-ger is pulled, scanning starts and the product scans until the trigger is released,or a label is read, or the maximum Stand Mode Indication has elapsed.Trigger Hold Multiple : When the trigger is pulled, scanning starts and the productscans until the trigger is released or Stand Mode Indication has elapsed. Readinga label does not disable scanning. Double Read Timeout prevents undesired mul-tiple reads of the same label while in this mode.Trigger Pulse Multiple: When the trigger is pulled, continuous scanning is acti-vated until Stand Mode Indication has elapsed or the trigger has been releasedand pulled again. Double Read Timeout prevents undesired multiple reads of thesame label while in this mode.Flashing: The reader flashes1 on and off regardless of the trigger status. Flashrate is controlled by Flash On Time and Flash Off Time. When Flash is ON thereader reads continuously. When Flash is OFF scanning is deactivated.Always On: No trigger pull is required to read a bar code. Scanning is continuallyon. Double Read Timeout prevents undesired multiple reads of the same labelwhile in this mode.Stand Mode: No trigger pull is required to read a bar code. Scanning turns onautomatically when an item is placed in reader's field of view. While in a standwatch state, the reader illumination LED goes from dim to maximum bright.1Controlled by Flash On Time.
