Datalogic Heron HD3130 Product Reference Manual

Also see for Heron HD3130: Product reference guide Addendum Quick reference guide Quick reference guide Quick reference guide

Contents

Datalogic Heron HD3130 Product Reference Manual Manual pdf 145 page image

Symbologies Enter/Exit Programming ModeProduct Reference Guide 135Code 128 Set Length 2This feature specifies one of the bar code lengths for Code 128 Length Controlon page 133. Length 2 is the maximum label length if in Variable Length onpage 133 Mode, or the second fixed length if in Fixed Length on page 133Mode. Length includes the bar code’s data characters only.The length can be set from 1 to 80 characters. A setting of 00 specifies toignore this length (only one fixed length). See "Set Length 2" on page 247 formore detailed programming instructions.Select Code 128 Length 2 SettingTo configure this feature, scan the ENTER/EXIT bar codeabove, then the bar code at left followed by digits fromthe Alphanumeric characters in Appendix D, Key-pad representing your desired character(s). End byscanning the ENTER/EXIT bar code again.Make a mistake? Scan the CANCEL bar code to abort andnot save the entry string. You can then start again at thebeginning.CANCELDEFAULT 80 = Length 2 is 80 CharactersCode 128 StitchingThis option enables/disables stitching for Code 128 labels. When parts of aCode 128 bar code are presented to the scanner with this feature enabled, thebar code parts will be assembled by the scanner’s software, and the data will bedecoded if all bar code proofing requirements are met.Code 128 Stitching = DisableCode 128 Stitching = EnableDEFAULT$CC8L2~$CC8ST00$CC8ST01