Programming ParametersF-4 Pegaso™ Industrial PDA with Windows® CECode 39 Enter 1 for Onand 0 for Off.Enable Enables/disables the Code 39 symbology. 0100 On / Off Off On OnEnableAggressiveDecodingEnables more aggressive decoding algorithmsto be used in order to scan hard to readlabels.0101 On / Off Off On OffEnableChecksumRequires the use of checksum characters toverify a bar code. 0102 On / Off Off Off OffSend Check-sumInstructs the terminal to include the checksumin the label transmission. 0103 On / Off Off Off OffFull ASCIIModeSupports the entire ASCII character set byreplacing various encoded ASCII characterswith their corresponding "ASCII" equivalents.0105 On / Off Off On OnMinimumLabel LengthSet the minimum label length to be less thanor equal to maximum label length. 0120 01 - 50 01 01 01MaximumLabel LengthThis feature specifies the maximum allowablelength of a Code 39 label. The length includescheck and data characters. Maximum LabelLength should be greater than or equal to Min-imum Label Length.0121 01 - 50 01 50 20Read Verifi-cationSets the number of times a label must be readbefore it is transmitted. 0122 01 - 04 01 02 01User IDSpecifies the symbology identifier (if any) thatis sent when parameter Send Code ID (Index0025) is set to 3. "ASCII" code zero (null) isused to indicate that an identifier is not to besent for the symbology.0123Any singleASCIIcharacter(00 = Off)'C' 'C' 'C'Code 93 Enter 1 for Onand 0 for Off.Enable Enables/disables the Code 93 symbology. 0400 On / Off Off On OffEnableAggressiveDecodingEnables more aggressive decoding algorithmsto be used in order to scan hard to readlabels.0401 On / Off Off On OffMinimumLabel LengthSet the minimum label length to be less thanor equal to maximum label length. 0420 01 - 50 01 01 02Code Parameter/ Description I.D. # AcceptableInputDefaultsMin Max Factory
