Bluetooth ManagerProduct Reference Guide 2-5Virtual Port allows you to specify the incoming port, which is used to communicate seri-ally with an incoming device just as if it were a physical COM port. This option is avail-able only if you have selected a Printer or Serial service.You can also select Encrypt or Authenticate from the Bluetooth control panel to apply ormodify those settings.1. To require Authentication, tap the checkbox, thentap OK.2. The Authentication Request dialog will thenopen, requesting that you enter a PIN. Use theInput Panel to type in the PIN.3. Tap OK to complete.The dialog will also appear when an Authenticationrequest is received from another device.Viewing or Deleting Paired DevicesOnce you have set up a Pairing, you can view the settings by double-tapping its namefrom the Connections tab. Tap the arrow to change the Virtual Port, or Delete toremove the device pairing. Tap Sync to initiate a Sync (available only if the service is anActiveSync connection).Figure 2-4. Bluetooth Pairing InfoThe icons displayed in the taskbar at the bottom of your Pegaso’s screen will show youthe state of the Bluetooth connection, as shown in Table 2-1.
