Programming ParametersF-14 Pegaso™ Industrial PDA with Windows® CETable F-3. Other ControlsCode Parameter/ Description I.D. # AcceptableInputDefaultsMin Max FactoryOther Controls Enter 1 for On and 0 for Off.Enable LabelProgrammingEnables/disables the ability to per-form label programming. FF00 On / Off On On OnBeeper Volume Adjusts the beeper volume. FF2000 = Off00 - 09(01 = Lowest;07 = Highest;08 = Higher;09 = Lower)07 07 07Long RangeTrigger ModeSelects the Long Range Triggermode. 0000On = ReleaseScan Off =Spot TimeoutOff Off OffSpotting BeamEnable Enables/disables the Spotting Beam 0001 On / Off On On OnSpotting BeamTimeoutSets the duration of the spottingbeam before it automatically turns off. 002300 = 0.25 sec.01 = 0.5 sec.02 = 1.0 sec.03 = 1.5 sec.04 = 2.0 sec.01 01 01Release ScanTimeoutSets the duration of the scan before itturns off. 0024 1-10 02 02 02Number ofGood-ReadBeepsDetermines the number of beeps fora good read indicator. 0020 01 - 04 01 01 01Good-ReadBeep ToneAdjusts the pitch of the beeper fre-quency. 002100 - 07(00 = Lowest;07 = Highest)00 00 00Good-ReadBeep DurationDetermines the duration of a goodread beep. 002200 = 0.07 sec.01 = 0.13 sec.02 = 0.18 sec.03 = 0.36 sec.00 00 00Send Symbol-ogy IdentifiersSpecifies the symbology identifier (ifany) that is sent by the decoder whenparameter Send Code ID (Index0025) is set to 3. "ASCII" code zero(null) used to indicate an identifier notto be sent for the symbology.002500 = Off01 = DLM IDs*02 = AIM IDs03 = User IDs00 01 00
