Datalogic PowerScan BT8300 Family Quick Reference Manual

Also see for PowerScan BT8300 Family: Guide Product reference guide

Datalogic PowerScan BT8300 Family Quick Reference Manual Manual pdf 13 page image

Connecting the PowerScan BT8300Quick Reference Guide 11Link by ContactRead the bar codes in sequence as shown in the steps below:5. Firmly position the reader onto the cradle. The BC 8030-BT cradle willemit a beep and the yellow LED will blink while the cradle is trying toestablish the connection.Four ascending beeps will be emitted, signaling that the BC 8030-BT cra-dle has been successfully connected to the PowerScan BT8300, and theyellow LED on the cradle will stop blinking.6. To connect another PowerScan PBT8300 to the BC 8030-BT cradle,repeat the sequence from steps 1 through 5. One Cradle can connect witha maximum of four readers.7. Upon completing the connection between the reader and cradle you mustset up the correct interface for your system. Refer to the BC 8030-BT BaseStation Charger QRG for information and programming labels, and scanthe appropriate bar code to select your system’s interface type.END of procedure. YOUR READER IS NOW READY TO READ CODES.1.Enter Configuration2.Handheld - Cradle3.Link by Contact4.Exit and Save Configuration