RF Programming Manual 7Software Verify that your unit supports the desired interface 1 . The list belowindicates the interface groupings supported. Contact your nearest Dat-alogic service depot if you don’t know your unit’s group, or need assis-tance to change the unit to another interface group.The Standard Keyboard Wedge/Wand Em./RS-232 Group supports:• I/F Type A — PC/XT w/Alternate Key Encoding• I/F Type B — AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 &95 w/Alternate Key Encoding• I/F Type C — PS/2 25 and 30 w/Alternate Key Encoding• I/F Type D — PC/XT w/Standard Key Encoding• I/F Type E — AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 &95 w/Standard Key Encoding• I/F Type F — PS/2 25 and 30 w/Standard Key Encoding• I/F Type H — IBM ® 3xxx w/102 keyboard• I/F Type I — PS/555530T w/104 keyboard• I/F Type J — NEC ® 9801 keyboard• Wand Emulation• RS-232• WN 2—RS-232 (SNI)The IBM/RS-232 Group supports:The Universal [Keyboard] Wedge Group:• Consult the Universal Wedge Connectivity Guide3 for more infor-mation.• For additional configuration/programming, refer to the Uni-versal Wedge Programming Guide3.1. Contact your dealer or sales representative if your desired interface is not listed. Interface groupdefinitions are subject to change without notice.2. Wincor Nixdorf® (formally SNI)• IBM Port 5B • IBM Port E• IBM Port 9B • RS-232• IBM Port 17 • WN-RS-2323. Contact your dealer or visit the website listed on the back cover of this manual for publications.
