Datalogic PowerScan RF User Manual

Also see for PowerScan RF: Programming guide

Contents

Datalogic PowerScan RF User Manual Manual pdf 31 page image

Systems Manual 27Mounting the Base StationThe Base Station can be secured to varying surfaces to ensure a perma-nent, stable installation. Several options are available.Horizontal (Table or Countertop) MountingUsing KeySlotsRefer to Figure 14 and follow these steps:1. Once you have identified the desired area for permanent BaseStation installation, use the mounting template included withthis manual to mark the position of its "key slot" mountingscrews.2. Install three #8 x 1" (4.1mm x 25.4mm) pan head, self-tappingscrews in the marked positions until completely threaded intothe mounting surface, then back the screws off two to three fullturns.3. Ensure that power and interface cables are securely connectedand routed in the channels provided in the bottom of the BaseStation.4. Align the Base Station key slots (wide end) with the screws,then slide the Base Station to position the screws in the smallerends of the key slots. Adjust the height of the mounting screwsif needed for a secure fit. The Base Station is now secured to thetable or countertop.Figure 14. Mounting Using Key Slots1. Key Slots 2. #8 x 1" (4.1mm x 25.4mm) PanHead ScrewBASE IDTX/RXCHARGEPOWER1 2