66 PowerScan® RF ScannerCommonConfigurationWhen this option is enabled, the Base Station attempts to share its con-figuration with a scanner as that scanner links to the Base Station. If,during linking, a scanner’s configuration file does not match the BaseStation’s current settings, the Base Station attempts to transmit to thescanner and overwrite the configuration file with its own.If the need is to share the scanner’s configuration files to the Base Sta-tion, use the Transmit Scanner Configuration to Base Station bar code.Base Station on page 33.Feature is applicable to scanner and Base Station.NOTERemember, programming changes to the Base Sta-tion have no effect until the new configuration isdownloaded via the feature Transmit Scanner Con-figuration to Base Station on page 33.CAUTIONSince a new/replacement scanner may have beenshipped with a custom configuration or may havebeen modified with other special programming, itmay not be desirable to download a potentiallyolder configuration from an existing Base Station.In this case, consider uploading the scanner’snewer configuration to the Base Station instead.SET -------------------------------------------ENABLE CommonConfiguration
