MATRIX 450N™ REFERENCE MANUAL1501010 TECHNICAL FEATURESELECTRICAL FEATURESPowerSupply Voltage 24 Vdc ± 20%Consumption (max) 2.5 A ( 0.5 A Matrix 450N; 2 A LT-03x ) see note in par. 4.1.1.Communication InterfacesMain- RS232- RS422 full-duplex2400 to 115200 bit/s2400 to 115200 bit/sAuxiliary - RS232 2400 to 115200 bit/sID-NET™ Up to 1MBaudEthernet (Built-in)supported application protocols1000 Mbit/s, Gigabit EthernetTCP/IP, EtherNet/IP, Modbus TCPInputsInput 1(External Trigger) and Input 2 Opto-coupled and polarity insensitiveMax. Voltage 30 VdcMax. Input Current 10 mAOutputsOutput 1 and Output 2 Opto-coupledVOut (ILoad = 0 mA) Max. 24 VdcVOut (ILoad = 10 mA) Max. 1.8 VdcPD = VOut x ILoad Max. 170 mWOPTICAL FEATURESImage Sensor CCDImage Format 2448 x 2050Frame Rate 15 frames/sec.Pitch 35°Tilt 0° - 360°Lighting System LT-03x Family Illuminators to EN 62471Laser Safety Class (pointers) Class 2 Laser Light to IEC60825-1ENVIRONMENTAL FEATURESOperating Temperature6 0 to 50 C (32 to 122 °F)Storage Temperature -20 to 70 C (-4 to 158 °F)Max. Humidity 90% non condensingVibration Resistance7 1.5 mm @ 5 to 9 Hz; 0.5 g @ 9 to 150 Hz 2 hours on each axisEN 60068-2-6 2 g @ 70 to 500 Hz; 2 hours on each axisShock Resistance 30g; 11 ms;EN 60068-2-27 3 shocks on each axisProtection Class8EN 60529IP65* when connected to the CBX connection boxes the electrical features for Output 1 and 2 become the following:Opto-isolated; VCE = 30 Vdc max.; ICE = 40 mA continuous max.; 130 mA pulsed max.;VCE saturation = 1 Vdc max. @ 10 mA; PD = 90 mW Max. @ 50 °C ambient temp.6 High ambient temperature applications should use metal mounting bracket for heat dissipation.7 When operating in high vibration environments use two L-shaped mounting brackets and mount the anti-vibration kit forC-mount lenses, see par. Error! Reference source not found..8 Requires correct connection to IP67 cables with seals and Lens Cover mounting.
