Datalogic matrix 450N Reference Manual

Also see for matrix 450N: Manual Product reference guide

Contents

Datalogic matrix 450N Reference Manual Manual pdf 41 page image

RAPID CONFIGURATION291STEP 9 – TEST MODEUse a code suitable to your application to test the reading performance of the system.1. Enter the Test function by pressing and holding the X-PRESS push button until the TestLED is on.2. Release the button to enter the Test function.Once entered, the Bar Graph on the five LEDs is activated and when codes are placedin the reading area (FOV), the Bar-Graph shows the Good Read Rate. In case of noread condition, only the STATUS LED is on and blinks.Figure 20 – X-PRESS Interface: Test Function3. To exit the Test, press the X-PRESS push button once.NOTE: By default, the Test exits automatically after three minutes.The Bar Graph has the following meaning: 20%  40%  60%  75%  95%