Datavideo DN-600 Instruction Manual

Also see for DN-600: Quick start guide

Datavideo DN-600 Instruction Manual Manual pdf 15 page image

15Play Setup LevelEntered from the Main Menu Level, this set of options enable various play related parameters andmodes to be setup. The lower three lines will look as below:There are 3 options and they are:SET UP LOOP PLAYPWR ON AUTO PLAYBIN Centric ModePressing the Next key will bring up the next option down on the list and will return to the top optionfrom the bottom. Table 3 details the actions for each option. Pressing the Menu key will exit to theMain menu level.Menu Option Action takenSET UP LOOP PLAY When enabled and the last frame has been played, the recorder will startplaying all over from the start of the BIN or CLIP.Note that the current type chosen will be marked with an asterisk [*].Also the loop play icon will be displayed on the first line of the LCD panel.PWR ON AUTO PLAY When enabled, the recorder will go directly into a play mode in the lastBIN selected once power is applied. It will then play the whole BIN or justthe selected CLIP within the current BIN depending on the BIN Centricmode setting.BIN Centric Mode When enabled [ON] the play back function plays all the CLIPS recordedin the currently selected BIN. When disabled [OFF] the play back functionplays the current CLIP only within the current BIN.Note that the current selection will be marked with an asterisk [*].Table 3 Play Setup LevelSystem SetupEntered from the Main Menu Level, this set of options enables various system related parameters andmodes to be setup. The lower three lines will look as below:There are 11 options and they are:SET SIGNAL TYPESET FAT32/NTFSMAKE FILE FOR ?MODIFY HDD VOLUME IDSET UP DV CHANNELSETUP HDD PARTITIONTC DISPLAY FORMATSET REMOTE CONTROLTOTAL SPACEUPGRADE FIRMWARESET GPI TRIGGER MODESET FACTORY DEFAULTNTSC SETUP LEVEL