DeLonghi PAC T140HPEC Instruction Manual

Contents

10REMOTE CONTROL DESCRIpTION1 Air conditioning symbol2 Dehumidifying symbol3 fan symbol4 Heating symbol5 SMArT symbol6 Signal transmission7 Selected temperature scale indicator8 Relative humidity indicator9 SLEEP symbol10 AUTo fan speed indicator11 fan speed indicator12 Clock13 Timer on symbol14 Timer off symbol15 MoDe button (selects the modes)16 on/Standby button17 fAn button18 Increase (+) and decrease (-) button19 Reset button (resets the factory defaultsettings)20 Timer on button21 SeT button22 Timer off button23 SWInG button24 SLEEP button25 °C or °f selection buttonUSING THE REMOTE CONTROL• point the remote control at the receiver onthe appliance. The remote control must beno more than 23 feet away from theappliance (without obstacles between theremote control and the receiver).• The remote control must be handled withextreme care. Do not drop it or expose it todirect sunlight or sources of heat.INSERTING OR REpLACING THE BATTERIES• remove the cover on the rear of the remotecontrol (fig.17);• Insert two r03 “AAA” 1.5V batteries in thecorrect position (see instructions inside thebattery compartment);• replace the cover.If the remote control unit is replaced or di-scarded, the batteries must be removed anddisposed of in accordance with current le-gislation as they are harmful to the environ-ment. Do not mix old and new batteries.Do not mix alkaline, standard (carbon-zinc) orrechargeable (nickel-cadmium) batteries. Donot dispose of batteries in fire. Batteries mayexplode or leak. If the remote control is not beused for a certain length of time, remove thebatteries.Note: This equipment has been tested and foundto comply with the limits for a Class B digital de-vice, pursuant to part 15 of the FCC Rules. These269101519203 45 711141822252312113171621248MAX. 23 feet17