DeLonghi PrimaDonna S Evo ECAM51 55 Series Instructions For Use Manual

Also see for PrimaDonna S Evo ECAM51 55 Series: Instructions for use

356. The appliance goes back to the “Settings” menu;7. Then press to exit the menu.8.3 MaintenanceHere you can find all the maintenance operations required bythe appliance over time:• Descaling: For instructions on descaling, see section “15.Descale”.• Install filter/Replace filter/Remove filter: For instruc-tions on how to install, replace or remove the filter (C4),see section “17. Water softener filter”.• Emptying the circuit:To select the operation, proceed as follows:1. Press (B2) to enter the “Settings” menu;2. Press the selection arrows (B4) or (B5) until“Maintenance” is displayed between the two dotted lines;3. Press (B3) to confirm;4. Press the selection arrows or until “Watercircuit emptying” is displayed between the two dottedlines;5. Press ;6. “Confirm?”: Press to confirm or to go backto the previous screen;7. “Empty grounds container”: extract and empty thegrounds container (A20). Press ;8. “Empty drip tray”: empty the drip tray (A24) and put backin the appliance complete with grounds container andgrille (A23). Press ;9. “Place 0.5l container under spouts”: position a containerunder the coffee spouts (A14) and hot water spout (C6).Press ;Important! Danger of burnsDo not leave the appliance unattended while the circuit isemptying.10. “Rinsing, Please wait”: the appliance performs a rinse cyclefrom the coffee spouts;11. “Empty water tank”: remove the tank (A18), empty it com-pletely, then press ;12. (If the filter is installed) “Remove filter”: remove the filterfrom the tank, then press ;13. “Insert tank, Press OK”: put the tank back in then press;14. “Water circ. emptying underway”: wait for the appliance toempty the circuit; (Important: hot water from the spouts!);As the circuit empties, the appliance may make morenoise: this is completely normal.15. “Empty drip tray”: remove, empty and reposition the driptray, then press ;16. “Emptying complete press ok to turn off”: press .The appliance goes off.Please note!The next time you turn the appliance on, the circuit will need tobe filled: follow the instructions in point 3 of section “5.4 Set-ting up the appliance”.8.4 Program beveragesThe appliance is set by default to automatically deliver standardquantities. To modify this quantity and customise the directlyselected beverages and the “DRINK MENU” (B4), pro-ceed as follows:1. Prepare the appliance for preparation of the beverage asdescribed in section “4.2 Making automatic recipes usingcoffee beans” or sections “5.3 Filling and attaching the milkcontainer” and “10.1 Adjusting the amount of froth”;2. Press (B2) to enter the “Settings” menu;3. Press the selection arrows (B4) or (B5) until“Prg. beverages” is displayed between the two dottedlines;4. Press (B3) to confirm: the appliance will list thebeverages that can be customised;5. Press the selection arrows or until the de-sired beverage is displayed between the two dotted lines:press to confirm;6. Beverages with coffee: the display shows “Programaroma”: press the selection arrows or untilselecting the desired aroma (see section “4.1 Temporarilyvarying the coffee aroma”), press to confirm theselection. Beverage preparation then commences andthe display shows “Program coffee” with a progress barthat indicates the quantity delivered: once the desiredquantity has been delivered, press or .Cappuccino and milk-based coffees: after having se-lected and confirmed the aroma, beverage preparationcommences and the display shows “Program milk” with aprogress bar that indicates the quantity of milk delivered:once the desired quantity has been delivered, pressor . The appliance then prepares the coffee: pressor to stop delivery when the desired quan-tity of coffee has been delivered.Hot water: press . Delivery commences: oncethe desired quantity has been delivered, press or.7. “Save parameters?”: to save the settings, press or(otherwise press or ).8. “Parameters saved” (or “Parameters not saved”). The appli-ance is ready for use again.Press or to terminate the preparation at any time.