Dea 124RR Instructions And Warnings
R1 2 4 R ROperating instructions and warnings13WARNING To ensure an appropriate level of electrical safety always keep the 230V cables (power sup-ply) apart from low voltage cables (motors power supply, controls, aerial and auxiliary circuits powersupply), and fasten the latter with appropriate clamps near the terminal boards. A4WARNING Any installation, maintenance or repair operation on the whole system must be carried outexclusively by qualified personnel. All these operations must be performed only after disconnecting thepower supply, and operating in strict compliance with the electrical standards and regulations in forcein the nation of installation. A5WARNING Install and wire the control board according to the instructions given in the instructionbooklet of each gate operator DEA System (such as hole drilling to allow for wires passage, use of wireclamps, etc.) Failure to comply with these instructions may jeopardize the level of electrical safety. A 6WARNING During motor stroke memorization, the control board detects automatically the presenceand type of photocells, safety devices and limit switches which are installed. It is therefore essential thatduring this phase the latter be properly connected and working. A7WARNING Wrong assessment of impact forces may cause serious damage to people, animal andthings. DEA System reminds all personnel that the installer must ascertain that these impact forces,measured according to EN 12245 prescriptions, are actually below the limits indicated by EN12453regulation. A8WARNING Any external safety device installed in order to conform to the limits set for impact forcesmust comply with EN12978. A9WARNING Using spare parts not indicated by DEA System and/or incorrect re-assembly may endangerpeople, animals and property, and may also cause malfunctioning of the product: always use partsprovided by DEA System and follow assembly instructions. A10WARNING Disposal of packaging materials (such as plastic, card board, etc.) must be done accordingto regulations in force locally. Do not leave plastic bags and polystyrene within the reach of children A113 MODELS AND CONTENTS OF THE PACKAGEThe control board 124RR is available with DEA System gate operators for overhead doors, slidinggates as well as barriers, or individually as spare part for the above mentioned gate operators.4 PRODUCT DESCRIPTION124RR control board is designed for the automation of DEA System gates operators in 24 V d.c., andtherefore it is fit for overhead doors, sliding gates and barriers. It is extremely versatile, easy to install andfully complies with European regulations concerning electromagnetic compatibility and electric safetyMain features of the product:1. setting all parameters by 3 keys and a 4-digit display;2. possibility of fine tuning of motor speed both during its complete stroke and during the last phase of it(slow-down). It keeps motor torque even at very low speed;3. possibility to set at will the slow-down duration;4. Internal anti-crash safety device whose sensitivity can be adjusted (according to a 70-level scale) sepa-rately in both operating directions;5. inputs to connect both normal and powered external safety devices (mechanical ribs or photocell bar-riers), with the possibility to run a self-test before each operation. Controlled photocells;6. built-in 433,92MHz radio receiver for both HCS and HT12E coding offering the possibility to searchand delete each transmitter separately |
Related manuals for Dea 124RR
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine