Dea 124RR Instructions And Warnings
           | |
1 2 4 R RROperating instructions and warnings209 MAINTENANCEWARNING Any installation, maintenance or repair operation on the whole system must be carried outexclusively by qualified personnel. All these operations must be performed only after disconnecting thepower supply, and operating in strict compliance with the electrical standards and regulations in forcein the nation of installation. A5WARNING Using spare parts not indicated by DEA System and/or incorrect re-assembly may endangerpeople, animals and property, and may also cause malfunctioning of the product: always use partsprovided by DEA System and follow assembly instructions. A910 PRODUCT DISPOSALWARNING Disposal of packaging materials (such as plastic, card board, etc.) must be done accordingto regulations in force locally. Do not leave plastic bags and polystyrene within the reach of children A5Demolition of this product does not cause particular dangers. Whenever the regulations in force in thecountry of installation demand it, it is always advisable and necessary to dispose suitably and separatelyof each material that make up the product: plastic, ferrous materials, batteries and electric parts.11 COMPLETE CLOSING ASSEMBLYRemember that everyone who sells and/ or motorises doors/gates becomes the manufacturer of theautomated door/gate machine, and must therefore prepare and preserve a technical folder containingthe following documents (see Machinery Directives Enclosure V).• Assembly drawing of the automatic door/gate.• Electrical connection and control circuit diagram.• Risk analysis including: a list of the essential safety requirements provided in machine Directive Enclosu-re I; a list of the risks posed by the door/gate and a description of the implemented solutionsThe installer must also:• Keep these operating instructions and the instructions for all other components in a safe place.• Prepare the operating instructions and general safety warnings (by filling up these operating instruc-tions) and hand a copy to the end user.• Fill in the maintenance handbook and hand a copy to the end user.• Draw up the EC declaration of conformity and hand a copy to the end user.• Fill in the complete EC label or plate and apply it to the automated door/gate.N.B. The technical folder must be kept for inspection by the competent national authorities for at least tenyears starting from the date of the automatic door/gate manufacturing.WARNING DEA System reminds all users that the selection, positioning and installation of all materialsand devices which make up the complete automation system, must comply with the European Directives98/37/CE (Machinery Directive), 89/336/CE and subsequent amendments (electromagnetic compati-bility), 73/23/CE and subsequent amendments (low voltage electrical equipment). In order to ensure asuitable level of safety, besides complying with local regulations, it is advisable to comply also with theabove mentioned Directives in all non-European countries.WARNING Wrong assessment of impact forces may cause serious damage to people, animal andthings. DEA System reminds all personnel that the installer must ascertain that these impact forces,measured according to EN 12245 prescriptions, are actually below the limits indicated by EN12453regulation.WARNING Any external safety device installed in order to conform to the limits set for impact forcesmust comply with EN12978. |
Related manuals for Dea 124RR
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine