Time, Date & Language16Time, Date & Language Date 01/05/2002Time S 12:00Date Format Day, Month Month, DayLanguage English Français, Deutsch, Espanól, ItalianoSystem Shutdown Disabled EnabledDST Auto ManualDateAs default, the date is entered DD:MM:YYYY on PAL models and MM:DD:YYYYon NTSC models, this can be changed using the Date format option below.TimeThe time should be entered in 24 hour format (HH:MM).Note: Summer and Winter time is signalled by an ‘S’ or ‘W’ next to the time.Date formatThe date format can be changed from Day, Month to Month, Day depending onregional preference.LanguageThe menus can be displayed in a number of languages. Upon selection these arepresented as a dropdown list.Note: When the time and date is displayed as ‘External clock’ the time and datesettings are being taken from unit 1 on the 485-Bus network.WARNING: Images may be overwritten if the time or date is adjusted whilstrecording is in progress.System ShutdownIf the BX2 needs to be switched off for any reason, the shutdown procedureneeds to be followed:1. Select ‘Enabled’ in the System Shutdown option.2. When the pop-up menu appears, press and hold camera 1 for five secondsto shutdown.3. When the message ‘It is now safe to switch off your unit’ is displayed,switch the BX2 off at the wall.Warning: Data loss or disk failure may occur if a system shutdown is notperformed before removing power.DSTDaylight saving time can be adjusted automatically or manually. By default, theautomatic setting will go forward one hour on the last Sunday in March at 01:00,and one hour back last Sunday in October at 02:00. The default automaticsettings can be changed. If the country where the unit is located does not useDST then select ‘Manual’.