37Appendix 2Using the remote controlThe remote control included with the BX2 operates like the front panel, see theoperator card for details.To use the remote control the ‘IR receiver’ option need to enabled in the ‘SystemOptions’ menu page.1 2 3 45 6 7 89 10UNITSELECT MODEHOLD SPOT EVENT GOTO11 1213 14 15 16Note: If multiple BX2s are in the same location it is necessary to disable the ‘IRreceiver’ option in the system options menu on all but one of the units.The remote control provides the following functions:UNIT SELECT Press ‘UNIT SELECT’ followed by acamera key to log onto another unit.Note: The remote contol does not have the ability tocontrol a DM video switcher.MODE Press to toggle Spot mode on and off,or to return to Live mode whenplaying back.HOLD Toggle freeze frame On and Off.SPOT Toggle Spot mode on and off, Selectsoperation of the spot monitor.EVENT Press to display the Event log.GOTO Press to display the Goto time option.1 - 16 Camera selection keys.Use to control the cursor in menus,or scroll around the screen when inzoom mode.Warranty informationPlease check with your local Dedicated Micros office (or www.dedicatedmicros.com)for warranty periods.Please note:• Warranty period commences from the date of DM invoice to the customer.• Warranty excludes general wear and tear.• Warranty is invalidated if the warranty label is removed or damaged, (i.e. if theproduct has been opened or tampered with).• Warranty repairs are conducted free of charge unless the equipment has beentampered with or accidentally damaged (or exposed to power surge, etc).• Dedicated Micros do not issue service replacements while goods are in repair.If you have any questions regarding the warranty of your DM product, pleasecontact your local office for further information.