Dedicated Micros BX2 Setup Manual
Also see for BX2: User Supplement
                                                                                                                                                                                                 | |
Contents
| 
3Important SafeguardsRead InstructionsAll the safety and operating instructions should be read before the unitis operated.Power SourcesThis unit should be operated only from the type of power sourceindicated on the manufacturer’s label.ServicingDo not attempt to service this unit yourself as opening or removingcovers may expose you to dangerous voltage or other hazards.Refer all servicing to qualified service personnel.VentilationEnsure unit is properly ventilated to protect from overheating.WARNINGTo prevent fire or shock hazard, do not expose this equipment to rain ormoisture. The lightning flash with arrowhead symbol within an equilateraltriangle is intended to alert the user of this equipment that there are dangerousvoltages within the enclosure which may be of sufficient magnitude to constitutea risk of electric shock.This is a class A product. In a domestic environment this product may cause radiointerference in which case the user may be required to take adequate measures.REGULATORY NOTES FCC AND DOC INFORMATION(USA and Canadian Models Only)WARNING: This equipment has been tested and found to comply with the limitsfor a Class A digital device, pursuant to part 15 of the FCC rules. These limits aredesigned to provide reasonable protection against harmful interference when theequipment is operated in a commercial environment. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used inaccordance with the instruction manual, may cause harmful interference to radiocommunications. Operation of this equipment in a residential area is likely tocause harmful interference in which case the user will be required to correct theinterference at their own expense.If necessary, the user should consult the dealer or an experienced radio/televisiontechnician for corrective action. The user may find the following booklet preparedby the Federal Communications Commission helpful: “How to Identify andResolve Radio-TV Interference Problems”.This booklet is available from the US Government Printing Office, Washington,DC20402, Stock No. 004-000-00345-4.This reminder is provided to call the CATV system installer’s attention to Art.820-40 of the NEC that provides guidelines for proper grounding and, inparticular, specifies that the cable ground shall be connected to the groundingsystem of the building, as close to the point of cable entry as practical.CE MarkThis product is marked with the CE symbol and indicates compliancewith all applicable directives.Directive 89/336/EEC.A “Declaration of Conformity” is held at Dedicated Micros Ltd.,11 Oak Street, Swinton, Manchester M27 4FL.WARNING |
Related manuals for Dedicated Micros BX2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine