Dedicated Micros SD Advanced Installation And Operation Manual

Contents

Dedicated Micros SD Advanced Installation And Operation Manual Manual pdf 111 page image

Dedicated Micros ©2009 111 SD AdvancedView ControlThe View Control page allows connected video inputs to be displayed full screen or in Quad/Multiway display format. The Help Video page can also be accessed.Red Full Show currently selected camera full screen.Green Quad Displays four images on-screen, putting thecurrently selected camera in the top left segmentof the four, and will increment all cameras by oneif pressed again i.e. if cam 1 is shown top left,cam 2 top right etc. then the views will incrementto cam 2 top left, cam 3 top right etc.Note: When a camera button is pressed to select a new camera, the new selection will bedisplayed in the top left hand corner of the display. The next three connected cameras willbe displayed in the following three positions.Yellow Multi By default displays nine images on-screen,putting the currently selected camera in the topleft segment, followed by the next eight camerasand will increment all cameras by one if pressedagain i.e. if cam 1 is shown top left, cam 2adjacent etc. then the views will increment tocam 2 top left, cam 3 adjacent etc.Blue Map Displays either the default camera selectionmap or a specific site map (if one has beenconfigured) with ‘hotspots’ showing cameralocations. A camera can be viewed by selectingthe corresponding hotspot.Purple Next Opens the next page of the Viewer menu.Note: For information on creating Camera Selection maps. Refer to the Display Setting->MapConfig’ section for further information.