Dedicated Micros SD Advanced Installation And Operation Manual

Contents

Dedicated Micros SD Advanced Installation And Operation Manual Manual pdf 72 page image

Dedicated Micros ©2009 SD AdvancedZone ActionsThis menu allows actions to be allocated to individual alarm zones; Primary and Secondary camerascan be allocated to the zone and actions undertaken following alarm activation. This page should beconfigured in conjunction with the Zone Inputs menu.Zone Select a zone (alarm) to configure.Primary Camera This allows a camera to be assigned as the primary cameraassociated with the Alarm Zone. The primary camera will bedisplayed when an alarm in this zone is triggered.Alarm Colour This displays the local alarm text in the selected colour and canbe useful in prioritising alarms. Options available are Red, Green,Blue, Yellow, Cyan and Magenta.Secondary Cameras This setting gives the facility to assign additional cameras to thezone. These cameras will become part of the alarm sequenceshown in the Viewer menus when the alarm zone is triggered.Create Database Entry An alarm activation will be added to the database. The zone titlewill be used as part of the entry information.Alarm Relay Select to trigger an alarm relay following zone activation. Selectthe specific relay via the ‘Relay’ option.Profile Change Select to enable the unit to switch from Normal to Event recordingfollowing alarm zone activation.Play Audio It is possible to play associated audio upon zone alarm activation.Alarm Reporting This must be enabled to allow the unit to send an alarmnotification to an external destination i.e an RVRC reporting viaNetVu ObserVer.