Defender SENTINEL 3 Instruction Manual

Also see for SENTINEL 3: User manual

Defender SENTINEL 3 Instruction Manual Manual pdf 26 page image

SENTINEL 3 26• Press the “UP/ DOWN/ LEFT/ RIGHT” buttons to drag the window and set theending point of the detection area.• Press the “ENTER” button to confirm the ending point of the detection area.3. Sensitivity: The blue bar shown on the Motion Detection screen indicates the motionvariation of the detection window. When the amount of motion detected exceeds thepreset sensitivity threshold, it triggers motion detection recording. For example, if thereis slight movement in your camera’s view (e.g. curtains blowing, shadows) you candecrease the sensitivity of that camera channel to avoid false triggering of motionrecord.6.3 RECORD SETUP1. QUALITY: LOW/ MEDIUM/ HIGH2. AUDIO:• ON: Audio recording enabled.• OFF: Audio recording disabled.3. DISK FULL:• Overwrite: When the hard disk is full the system overwrites your oldestrecorded footage (recommended).• Stop: When the hard disk is full the system stops recording (message willbe displayed).4. POST ALARM: Recording time after an event (Alarm/ Motion Detection) hasbeen triggered.5. MANUAL: Set frames per second (FPS) for manual recording.6. CONTINUOUS: Set FPS for schedule continuous recording.7. MOTION DETECT: Set FPS for schedule motion detection recording.8. ALARM: Set FPS for schedule alarm recording (if you have alarm sensorswired into the DVR).9. DEFAULT: Reload the factory default setting.