Defender SENTINEL 3 Instruction Manual

Also see for SENTINEL 3: User manual

Defender SENTINEL 3 Instruction Manual Manual pdf 52 page image

SENTINEL 3 524. PPPoE: If you have an ADSL modem, you may need to set up PPPoE in order toview your DVR from outside your network. You will need your login information. If youdo not have it, please contact your Internet Service provider to provide you with thelogin information.5. HTTP Port: Select the port number (default is port:2000)1. Authentication: Choose whether or not a user name and password are required2. Enter your DSL user name in the User Name box.3. Enter your DSL password in the Password box.4. Re-enter your password in the Confirm box.5. Click the “Set Change” button.6. Click the “Reboot” button.7. Power off the DVR and power it back on to confirm the changes. The changes willnot take effect until you restart the DVR.8.2.2 USER SETUPThis section allows you (the administrator) to set up multiple user accounts so otherauthorized users can access the DVR. These users will be able to view live display, record,and capture images. However, they will not be able to change configuration settings. Whenyou have set up user accounts, be sure to write down the user name and password for eachaccount so you can provide the users with the appropriate login credentials.Authorization: Specify whether authentication is needed to access the DVR. If you select“No Need,” there is a possibility that unauthorized users may access your DVR.New User/Change Password: Add user or change password (Max. users = 30).Note: For best results, a maximum of 20 simultaneous users is suggested.Delete User: Delete user account.Current Users: Currently registered users.Reboot: Restart the Network DVR.Firmware update: Updates the firmware, if a new firmware version becomes available.Firmware updates may be available at www.defender.com (advanced users only).Restore factory default configuration: Click “Restore factory default configuration” to return tofactory default settings (Please restart the Network DVR after setup has been completed).