Dell 1135 Mono Laser User Manual

The machine is experiencing problems that require service such as LSU error or fusererror.Power problemsClick this link to open an animation about solving power problems.Condition Suggested solutionsThe machine is not receiving power,or the connection cable between the computer and themachine is not connected properly.Plug in the power cord and press Power ( ) onthe control panel.Disconnect the machine cable and reconnect it.For Local PrintingFor Network Printing (network model only)Paper feeding problemsCondition Suggested solutionsPaper jams during printing. Clear the paper jam (See Clearing paper jams).Paper sticks together. Check the maximum paper capacity of the tray (See Print media specifications ).Make sure that you are using the correct type of paper (See Print mediaspecifications ).Remove paper from the tray and flex or fan the paper.Humid conditions may cause some paper to stick together.Multiple sheets of paper donot feed.Different types of paper may be stacked in the tray. Load paper of only one type, size,and weight.Paper does not feed intothe machine.Remove any obstructions from inside the machine.Paper has not been loaded correctly. Remove paper from the tray and reload itcorrectly.There is too much paper in the tray. Remove excess paper from the tray.The paper is too thick. Use only paper that meets the specifications required by themachine (See Print media specifications ).If an original does not feed into the machine, the document feeder rubber pad may