Basic setupAfter installation is complete, you may want to set the machine’s default settings. Refer to the next section if you wouldlike to set or change values. This chapter gives you step-by-step instructions for setting up the machine.This chapter includes:Altitude adjustmentChanging the display languageSetting the date and timeChanging the clock modeChanging the default modeSetting soundsEntering characters using the number keypadUsing the save modesSetting the default tray and paperSetting job timeoutAltitude adjustmentThe print quality is affected by atmospheric pressure, which is determined by the height of the machine above sealevel. The following information will guide you on how to set your machine to the best print quality or best quality ofprint.Before you set the altitude value, determine the altitude where you are.1. High 12. High 23. High 34. Normal1. Ensure that you have installed the printer driver with the provided software CD.2. You can launch Printer Settings Utility from the Start menu, select Programs or All Programs > Dell > DellPrinters > your printer driver name > Printer Settings Utility.3. Click Setting > Altitude Adjustment. Select the appropriate value from the dropdown list, and then click Apply.If your machine is connected to a network, Embedded Web Service screen appears automatically. ClickMachine Settings > System Setup > Machine Setup > Altitude Adj. Select the appropriate altitude value,and then click Apply.If your machine is connected via a USB cable, set the altitude in Altitude Adj. option on the machine’sdisplay.Changing the display languageTo change the language that appears on the display, follow the steps below:1. Press Menu ( ) on the control panel.2. Press the left/right arrow until System Setup appears and press OK.Press the left/right arrow until Machine Setup appears and press OK.