Using the System Setup Program 4-7Advanced Menu CategoriesTo access the Advanced menu (see Figure 4-3), use thearrow keys to highlight Advanced. This section explainsin detail each of the System Setup categories in theAdvanced menu.The Advanced menu allows you to set the COM and LPTaddresses, set the LPT mode, enable or disable theon-board diskette controller, enable the PS/2 mouse, andenable or disable the built-in SCSI controller. TheAdvanced menu also lets you control the PCI scansequence. The PCI scan sequence determines which typeof PCI device is scanned first: built-in PCI drives or PCIdevices installed in PCI expansion slots.Figure 4-3. Advanced Menu of the System Setup ProgramSerial Port 1: [Auto]Serial Port 2: [Auto]Parallel Port: [378, IRQ7]Parallel Mode: [Output only]Diskette Controller: [Enabled]Onboard SCSI: [Enabled]PCI Scan Sequence: [Slot devices first]Use MP Specification [1.4]PS/2 Mouse: [Enabled]Item-Specific HelpBIOS Version: AXXMain Advanced Security ExitConfigures the system’sbuilt-in serial port.configuration options and system datatitle boxhelpkey functionsF1 Help Select Item -/+ Change Values F9 Setup DefaultsESC Exit Select Menu Enter Select Submenu F10 Previous ValuesDell System PowerEdge 2200 Setup
